Equipment Guide

Electric Pallet Stacker Guide: Types, Capacity & How to Choose

Not every lifting job needs a full forklift. For lighter, lower-volume work in tighter spaces, an electric pallet stacker is often the more practical — and more affordable — choice. This guide covers the different types available and how to decide which fits your operation.

RS Machinery & Engineering·7 min read·Updated July 2025

Quick Answer

An electric pallet stacker is a lighter-duty lifting machine, typically without the large counterweight a forklift relies on for stability. Instead, most stacker designs use straddle legs that extend under the pallet to provide stability while lifting. This makes stackers narrower, lighter, and better suited to tight aisles — but with lower capacity and lift height than a comparable forklift.

What is an Electric Pallet Stacker vs a Forklift?

An electric pallet stacker is a lighter-duty lifting machine, typically without the large counterweight a forklift relies on for stability. Instead, most stacker designs use straddle legs that extend under the pallet to provide stability while lifting, rather than a rear counterweight. This makes stackers narrower, lighter, and better suited to tight aisles — but with lower capacity and lift height than a comparable forklift.

Types of Electric Stackers

Walkie stacker (pedestrian-operated)

The operator walks alongside or behind the machine rather than riding on it. Typical capacity 1–1.5T, lift height up to 3–4m. Common for lower-volume warehouse and retail back-of-house use.

Straddle stacker

Legs straddle the pallet on either side, providing a wide, stable base without needing a counterweight. Good for narrow-aisle work where a counterbalance forklift wouldn't fit.

Reach stacker

Uses a pantograph (scissor-link) mechanism to extend the forks forward and up, achieving the highest lift heights in the stacker category — useful for higher racking without the footprint of a full reach truck.

Counterbalance stacker

Uses a small counterweight instead of straddle legs, functioning more like a mini forklift. Useful where straddle legs can't fit under low pallets or uneven flooring.

Order picker

The operator rides up with the forks to pick individual items at height, rather than moving whole pallets. Common in distribution centres with high SKU counts.

Capacity Ranges

Electric stackers typically top out around 1T–2T, compared to forklifts which range from 1.5T to 72T depending on class. If your operation regularly handles loads above 2T, or needs the outdoor durability and higher lift height of a forklift, a stacker generally isn't the right tool.

When to Use a Stacker vs a Forklift

Choose a stacker when:

  • Loads are light-duty and low-volume
  • You're working in narrow aisles or confined indoor spaces
  • Budget is a key consideration — stackers are generally cheaper to rent and run than forklifts
  • Some stacker types don't require a full Forklift Operator Certificate (see below)

Choose a forklift when:

  • Loads exceed 2T or need to be handled at high frequency
  • Work is outdoors or on uneven ground
  • Stacking height exceeds what a stacker can reach (generally above 5m)

Singapore Warehouse Context

Electric stackers are common across SME warehouses, retail back-of-house operations, and light manufacturing facilities in Singapore, where floor space is often at a premium and loads are lighter than in port or heavy industrial settings. Their narrow footprint makes them a practical fit for older or smaller warehouse layouts with tighter aisle widths.

Operator Certification

Whether a Forklift Operator Certificate (FOC) is required depends on the type and capacity of the stacker. Some pedestrian-operated walkie stackers fall outside the scope of standard FOC requirements, while ride-on and higher-capacity units generally require certified operation under WSH Act rules. Always confirm the specific certification requirement for your stacker model and configuration — don't assume a lighter machine is automatically exempt. See our Forklift Regulations Singapore guide for the broader regulatory picture.

Battery and Charging

Most electric stackers run on 24V–48V batteries, charged overnight with a typical 6–8 hour runtime per full charge on a standard shift. For multi-shift operations, factor in either a fast-charge-capable battery or a spare battery for swap-out to avoid downtime mid-shift.

RS Mech Context

RS Mech supplies the Hangcha CBD15-WS electric stacker along with the EP Equipment range for light-duty warehouse applications. For heavier warehouse work that exceeds stacker capacity, our electric counterbalance forklift range (1.5T–5T) covers the gap between light stacker duty and full heavy-class forklift work.

Frequently Asked Questions

Looking for the right equipment?

Whether you need a light-duty electric stacker or a heavy-duty counterbalance forklift, RS Mech has the right machine for your operations.

Sources & References

  • Ministry of Manpower (MOM) Singapore — Workplace Safety and Health (Operation of Forklifts) Guidelines
  • Workplace Safety and Health Council (WSHC) — Safe Operation of Forklifts
  • RS Machinery & Engineering — Internal Fleet Data & Rental Specifications